Home Depot Jailbreak [32-bit device] iOS 9.1-9.3.4 or update device

Home Depot is a jailbreak tool developed by @REALKJCMEMBER for  32-bit devices users who have been stuck on an unjailbroken 32-bit device for the past year and a half.

NOTE: – INSTALL ONLY IF YOU KNOW WHAT YOU ARE DOING.

Before starting the tutorial please read the important notes below:

iPhone 6s or below on iOS 10.2 follow this guide to jailbreak your iDevice

iPhone7/7+ on IOS 10.1-10.1.1 , iPhone 6s/6s+ and iPad Pro on IOS 10-10.1.1 follow this guide

This jailbreak is Semi-Untethered which means that you will have to use an app to rejailbreak your device after each time you reboot

There is still no jailbreak solution for IOS 9.3.5 for any device , So don’t try any False methods. we will update once the jailbreak drops for these firmware’s.

This Jailbreak is Only for 32-bit devices on iOS 9.1-9.3.4 , DO NOT TRY IT ON ANY 64-BIT DEVICE ON THESE FIRMWARE, IT JUST WOULDN’T WORK.

Prerequisites:-

• iPhone [32-bit devices on iOS 9.1-9.3.4], Please make sure that your phone is charged above 40% before continuing
• Windows or Mac laptop or PC
•  iTunes must be installed on your windows or mac, Drives will be installed automatically once you connect your device after installing iTunes.  This is completely normal.
•  Please make sure you have an apple id, or create one at the following address :- https://appleid.apple.com/account#!&page=create
• USB lightning cable
• BACKUP your data in iTunes just to be safe

Download these the files below

Home Depot IPA:- http://wall.supplies/MixtapePlayerRC2.ipa

Cydia Impactor :- http://www.cydiaimpactor.com/

Follow the guide below to Jailbreak 32 bit devices using Home Depot

STEP 1 :- download the files above and extract Cydia impactor in a folder and move the Home Depot IPA file in the same folder.

STEP 2 :- on your iPhone , go to settings>iClouds>Find your iPhone and turn it off

STEP 3 (recommended) :- Open settings>passcodes, and turn off the lock on you iPhone

STEP 4 :- Now Connect your iPhone to the PC and start Cydia impactor, make sure you PC/Mac is connected to internet

STEP 5 :- now drag and drop the ipa file on cydia impactor and enter your apple id and password , dont worry its 100% safe as it is used by Apple servers

STEP 6 :- let theprocesss finish and you will get a ‘completed’ message on cydia impactor and an app on your iPhone once its done

STEP 7 :- now you can disconnect your iPhone from the pc, and open settings>general>profile & device management, now open the tab with your apple id and trust the app

STEP 8 :- enable airplane mode (this gives more success rate of jailbreak in an attempt)

STEP 9 :- now open the app from the home screen and wait for 15 to 20 seconds, it will show nothing but a white screen , once the process is completed your iPhone will reboot automatically and you will see the Cydia icon , if you see the icon then proceed directly to step 11

STEP 10 :- if you don’t see Cydia icon then hard reboot/reset you iPhone, this can be done by pressing the home button and the power button together keep holding the buttons until you see the apple logo, now follow step 9 again (this may take multiple attempts to work so keep doing until you see the Cydia icon)

STEP 11 :- now you can revert back the changes done in step 2,  step 3 and step 8

STEP 12 : if you have Cydia installed then you can run it and wait for it to reload all the sources and now you can install tweaks on iPhone and you can use it more freely

You will have to use step 9 after each time you reboot your device, this jailbreak is semi untethered (as mentioned above).

We will keep you updated on the upcoming jailbreak for IOS 9.3.5, stay tuned.

You can ask questions in comments, we are happy to help 😉